Pine River is a Cass County town strung along its river — in-town homes, farms, and cabins up the banks, every one of them on a well. We fix the pumps, replace the tanks, drill the new wells, and inspect the old ones when places sell.
Pine River is a Cass County town where wells serve everything from in-town homes to cabins up the river — and idle winter wells that need a spring check before the season starts.
Pine River repair calls often start with a well that sat. A cabin opened in May with no water, a tank that lost its charge over the winter, a switch that corroded sitting still. Idle wells fail differently than worked ones, and we ask about it on the phone.
Most wells across the lakes region land between 100 and 300 feet, and Pine River's wells follow the river ground — sand sets near the water, glacial till on the ridges. Your written estimate names the depth range we expect on your lot before the rig rolls.
Pine River is the north end of our regular run — we plan days up here, and you get a firm window. Free written estimates, phones answered around the clock.
Testing first, same as everywhere: switch, control box, tank charge — $125–$300, $175–$500, cheap before dear. If the pump down the hole has failed, pulling the string starts near $1,000, priced in writing before we pull. On a well that sat all winter, we also check the water itself before we call it done.
Replacement prices by depth: $450–$1,400 under 100 feet, $1,000–$2,500 at 100–300 feet, $1,500–$5,000 past 300. For cabins, we'll be straight about the math: a place used eight weekends a year wears a pump differently than a full-time house, and the repair-versus-replace call changes with it.
A new well in Pine River is one job with us: site visit and setbacks checked, the state well notification filed before the rig drills, the hole drilled and cased, the casing grouted and sealed, then pump, pressure tank, and electrical hookup. Per-foot: $28–$50 in sand and gravel, $40–$60 in mixed glacial ground, $50–$65 in bedrock, plus a $2,500–$5,500 completion package — details on our well drilling cost page.
Pine River drilling is cabins growing into houses, new builds on the river, and old shallow wells giving up. We'll test what the old well can honestly do — flow, recovery, water quality — before quoting a new hole.
Pressure tanks run $400–$2,500 installed by size; a tank that sat drained all winter gets its charge checked before it's condemned. Selling up here? Well inspections run $250–$550, well and septic together $400–$650 on one visit, lab panels available, report in writing for the lender.
Tell us what the water's doing — and when the well last ran. On an idle well, that second answer matters as much as the first.
We test at the well on a planned Pine River day, and write the estimate standing there.
Written price, scope, and timing before any work starts — no verbal okay out here either.
Most repairs finish the same visit. New wells run 4–8 weeks first call to water on, on the schedule we gave you.
Water run clear, pressure checked, paperwork in hand before we head back down the highway.
We work the towns around Pine River, too. Near Aitkin? Read about well drilling in Aitkin. Or if you're closer to Crosslake, see well drilling in Crosslake.
Swapped a waterlogged standard pressure tank that had the pump short-cycling every few minutes. New tank, new switch, pressure set and checked across the house.
“The pump was clicking on and off constantly and I knew that couldn't be good for it. They showed me the old tank was full of water — no air cushion left. New tank in the same visit, and the clicking stopped.”
Final price: $1,150 · Half a day on site.
Well trouble in Pine River, or planning a new well? Call (612) 260-8779 — we answer around the clock — or send the form and we'll call you back.