Well Pump Replacement in Brainerd, MN
A well pump replacement starts with a simple question: how deep is the pump? A jet pump sits above ground where you can touch it. A submersible hangs at the bottom of the well on drop pipe and wire, and everything comes up together. Depth is what separates a $700 job from a $3,000 one.
Replacement bands around Brainerd: a jet or shallow-well pump under 100 feet runs $450–$1,400. A standard submersible at 100–300 feet runs $1,000–$2,500. A deep submersible past 300 feet runs $1,500–$5,000. Your written estimate names your depth class and the exact pump before we pull anything.
We size the new pump to the well and the house — gallons per minute for the fixtures you actually run, not the biggest pump on the shelf. An oversized pump short-cycles and wears out early; an undersized one leaves the upstairs shower weak.
Not sure you need a replacement at all? Start with well pump repair — if a switch or a control box brings your water back for a few hundred dollars, that's the call we'll make.
Replacement day is usually one day. We pull the old string, inspect the drop pipe and wire, set the new pump, sanitize the well, and run the water until it's clear. You get the old pump back if you want to see what failed — most folks do.
What's included in the price
The pump, the labor to pull and set it, and a check of the wire and drop pipe on the way down. If the wire is chafed or the pipe is brittle, we'll show you and price it before it goes back in the hole — surprises buried 200 feet down help nobody. The pressure switch and tank get tested too, because a new pump on a bad tank won't stay new for long.
Replace the pump, or drill new?
Sometimes the pump is fine and the well is the problem — it silts up, the screen plugs, or it just can't make enough water anymore. Then the honest comparison is a new pump against what a new well costs, and we'll walk you through both.
How long does a well pump last?
Most submersibles run 10–15 years. The biggest life-shortener is a waterlogged pressure tank making the pump start and stop constantly — which is why we check the tank on every replacement.
How long will we be without water?
Usually just the day of the swap. We pull, set, and sanitize in one visit for most wells; deep wells past 300 feet can run longer and we'll tell you before we start.
What does 'cost to replace well pump' actually include?
Pump, pull-and-set labor, and testing of the switch, wire, and tank. If wire or drop pipe needs replacing, that's priced in writing before it goes in — never buried in the final bill.
Do you warranty the new pump?
The pump itself carries the manufacturer's warranty. Our labor we stand behind in writing on the invoice: if a joint we made leaks or a connection we set fails, we come back and put it right — that's spelled out before you pay, not after.
Call (612) 260-8779 — we answer around the clock — or send the form and we'll call you back.